Danfoss Shut-off valves 148B4686 STC 150 M STR SHUT-OFF VALVE CAP

Cage Type:CR - Phenolic Outer; d:17 mm; Contact Angle:15 º; Design Units:METRIC; Da - Outer Ring Backing Diameter:42.000 mm; Limiting Speed (Oil):88400 rpm; C0 - Static Radial Rating:6480 N; Limiting Speed (Grease):44200 rpm; Ball Type:Ceramic; da - Inner Ring Backing Diameter:22.500 mm;

Pre Install Clearance Min:0.0030 in; Shaft Tolerance:0.0015 in; Dimension H:1.25 in; Grease Lubrication - B/C/O Seal:1600 rpm; Dimension D Max:7.13 in; Dimension A:2.25 in; Grease Lubrication - T Seal:3200 rpm; Dimension SV:3.14 in; Bearing Number:22211; Eng Internal Radial Clearance - Max:0.0037;

Type:Bearings with Housin; Bearing Material:[Steel] Steel; Shape:L-Shaped; Bearing Part Number:608; RoHS:6; Number of Bearings:Single; Housing Material:[Aluminum Alloy] Alu; Bearing Used:Deep Groove Ball Bea; Shape:L-Shaped; Bearing I.D. d(mm):8;

Ew:56 mm; b:20.8 mm; Characteristic cage frequency, FTF:0.42 Hz; Fw:40 mm; Max operating temperature, Tmax:120 °C; Cr:51 kN; Min operating temperature, Tmin:-20 °C; Lw:16 mm; Mass:0.12 kg; Bc:20.8 mm;

RoHS:6; Diameter series symbol:Medium Load; B:54; Machining:No; Bearing Unit, Type:Pillow Type; Unit, Type:Insert Bearing Unit; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Unit Body Material:Cast Iron; Unit Body Material:Cast Iron;

Seal, Shield Symbols:No; Holder Color:No; Basic Load Rating, Static Rating(N):124000; RoHS:6; Acoustic Symbol:No; Low Torque Specification:No; Internal Symbol:No; Clearance sign:No; Basic Load Rating, Dynamic Rating(N):129000; Outer Ring:With Outer Ring;

H:148 mm; d1:44.1 mm; B1:35.7 mm; Designation of housing:FL206-; S:9 mm; e:18 mm; G:M6x1; Designation of bearing:ES206-20G2T04; B:23.8 mm; N:16mm;

db - Cone Backface Backing Diameter:13.39 in; d:12.5000 in; Cage Type:Pin-Type; Design Units:Imperial; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:656000 lbf; Cg - Geometry Factor9:0.186; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:97800 lbf; Cone Part Number:HM25

Ce - Dynamic Radial Rating1:4560 N; R - Inner Ring To Clear Radius2:0.3 mm; C0 - Static Radial Rating:1470 N; Bearing Weight:0.020 Kg; do - Ball Diameter:4.762500 mm; Design Units:METRIC; D:28.000 mm; r - Outer Ring To Clear Radius3:0.3 mm; Limiting Speed (Oil):189360 rpm; d:12 mm;

Flange O.D. H(φ):57; Shape:Flange Type; Volume Discount:Available; Number of Bearings:Single; Bearing Material:Stainless Steel; Flange Shape:Compact Type; Holder Surface Treatment:Not Provided; RoHS:6; Number of Bearings:Single; Housing Material:304 Stainless Steel;

Designation of housing:FE205-; B1:30.9 mm; Weight:0.79 kg; J:70 mm; C0:7.88 kN; B:21.4 mm; A2:42.4 mm; Designation of bearing:ES205G2T20; s1:24.2 mm; A1:11 mm;

B1:44.3 mm; S:17.4 mm; B:34.8 mm; N1:16 mm; L:97 mm; SW:3 mm; Recommended tightening torque for set screw:5.5 Nm; L1:62 mm; A:32 mm; A1:12 mm;

Days to Ship:10 Days; Bearing Inner Dia. Shape:Tapered hole adapter; Bearing Unit, Type:Round flange shape; Diameter series symbol:Used for Light load; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Machining:Cast iron cover moun; Stroke:No; Unit, Type:Insert Bearing Unit; d:4

Shape:T-Shaped; Bearing Part Number:6002; Bearing I.D. d(mm):15; Bearing Retained:Yes (with retaining; Volume Discount:Available; Lateral Width L(mm):68; Height Indication:Height Selection; Days to Ship:10 Days; Height H(mm):40; Holder Surface Treatment:Black Oxide Coating;

Recommended tightening torque for set screw:5.5 Nm; G:M6x1; T max.:100 °C; H:33.3 mm; s1:15.5 mm; Designation of bearing:UC202G2L3; H1:15 mm; Weight:0.7 kg; A1:22 mm; T min.:-20 °C;