Yuken DT-02- 22 pressure valve

Mass adapter sleeve assembly:161 kg; G2:M 8; Hydraulic nut:HMV 106E; A:6 mm; G3:12 mm; G:Tr 530x6; Lock nut:HM 31/530; B1:364 mm; Locking device:MS 31/530; d3:670 mm;

Oil Speed Rating n2:15000 rpm; Fillet Radius ra:1.00 mm; d:25.000 mm; Sealed Speed Rating n3:8500 rpm; B:15.00 mm; Grease Speed Rating Open/Shielded n1:12000 rpm; Accessories:Two Seals; D:52.0000 mm; Basic Static Radial Load Rating Co:7800 N; Oil Speed Rating Open/Shielded n2:15000 rpm;

Pu:0.060 kN; Weight:0.07 kg; Grease:12 600 min-1; Dynamic (Cr):4.82 kN; d:10.4 mm; B:10 mm; Static (Cor):1.36 kN; Bearing designation:PLC 03-79  ; Oil:17 000 min-1; D:35 mm;

d1 ≈:150 mm; D:150 mm; D2:125 mm; H:40.9 mm; ra max.:1 mm; s:52 mm; Basic static load rating C0:325 kN; Basic dynamic load rating C:119 kN; r1,2 min.:1.1 mm; da min.:130 mm;

A1:79.375 mm; A2:120.65 mm; Cap bolt recommended tightening torque:149.1 N·m; ba:32.544 mm; End plug (suffix Y):EPR 7; Adapter sleeve assembly:SNW 15x2.3/8; PG:1/8 NPT; Initial grease fill:68.04 g; Bearing:22215 EK; P120°:36.9 kN;

Frame Size B:18 in; Bolt Pattern D:2 3/4 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Height G:3.438 in; Frame Size A:4 41/64 in; Bolt Pattern E:16 1/2 in; Shaft C/L Distance F:1 27/32 in; Travel:12; Bolt Pattern C:0.55 in;

d:30.000 mm; D:90.0000 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:32500 N; Oil Speed Rating Open/Shielded n2:7500 rpm; Basic Dynamic Radial Load Rating C:45700 N; B:23.00 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:6200 rpm;

Oil Speed Rating n2:24000 rpm; Sealed Speed Rating n3:13000 rpm; B:11.00 mm; d:15.000 mm; Basic Dynamic Radial Load Rating C:7800 N; Oil Speed Rating Open/Shielded n2:24000 rpm; Accessories:Without Accessories; Fillet Radius ra:0.64 mm; Grease Speed Rating Open/Shielded n1:19000 rpm; Basic Static Ra

d:80.000 mm; Basic Static Radial Load Rating Co:129000 N; Fillet Radius ra:2.00 mm; D:170.0000 mm; B:39.00 mm; Basic Dynamic Radial Load Rating C:138000 N; Grease Speed Rating Open/Shielded n1:3300 rpm; Oil Speed Rating Open/Shielded n2:4000 rpm; Accessories:Two Shields;

α:124 °; h:172 mm; d:170 mm; B:70 mm; Coefficient of friction µ min.:0.08; B1:10 mm; Coefficient of friction µ max.:0.15; a:3.5 mm; Mass bushing:3.9 kg; Specific dynamic load factor K:25 N/mm²;

Oil seal:2 x TSD 30/500 U; Bearing (basic designation):230/500 K; Oil level, min.:94 mm; N1:48 mm; N4 max.:35 mm; J1:260 mm; A2:455 mm; Oil level, max.:114 mm; J:1030 mm; L:1220 mm;

Grease Speed Rating Open/Shielded n1:2600 rpm; D:225.0000 mm; Sealed Speed Rating n3:1700 rpm; Fillet Radius ra:2.00 mm; B:35.00 mm; Basic Static Radial Load Rating Co:125000 N; Accessories:Two Shields & Snap-R; Oil Speed Rating Open/Shielded n2:3200 rpm; Basic Dynamic Radial Load Rating C:125000 N;

Basic Dynamic Radial Load Rating C:133000 N; Fillet Radius rb:1.00 mm; D:230.0000 mm; B:28.00 mm; Grease Speed Rating n1:2400 rpm; Oil Speed Rating n2:3000 rpm; d:170.000 mm; Basic Static Radial Load Rating Co:170000 N; Fillet Radius ra:2.00 mm;

C1 max.:22 mm; w:41 mm; r1 min.:0.6 mm; l5 ≈:25 mm; Mass rod end:1.4 kg; l3 min.:60 mm; dk:47 mm; d2 max.:84 mm; Material constant KM:330; B:25 mm;

B:16 mm; F:39 mm; Static (Coa):17.8 kN; b1:8.25 mm; Dynamic (Ca):21.5 kN; d2:30 mm; D:62 mm; rs (min):1 mm; d2 (max):42.2 mm; Pu:2.170 kN;